Compatible 1G SFP Transceiver – 1000BASE-LX/LH 1310nm, LC, 10 km (GLC-LH-SMD Compatible) sfp module
Product Highlights
- 1 Gbps SFP for long-reach fiber (1310 nm).
- Up to 10 km on SMF; MMF support with conditioning cable.
- Duplex LC connector with DOM for live diagnostics.
- Pre-programmed for Cisco SFP ports — plug-and-play replacement.
Product Description
This hot-swappable 1G SFP module is engineered for long-reach fiber links, supporting the 1000BASE-LX/LH standard. It operates at a 1310nm wavelength for deployments of up to 10 km on single-mode fiber (short multimode links are supported with a mode-conditioning patch cable). Factory-programmed for broad Cisco compatibility (GLC-LH-SMD profile), it features Digital Optical Monitoring (DOM) for real-time diagnostics of key optical parameters. It serves as a cost-effective, plug-and-play replacement for Cisco OEM modules, ideal for data center uplinks, enterprise backbones, and ISP access networks.
Product Features
- High-Speed Transmission: 1 Gbps (1000BASE-LX/LH) SFP module for Gigabit Ethernet requirements.
- Wavelength & Distance: 1310nm transmitter; up to 10 km on single-mode fiber (SMF); ~550 m on multimode fiber (MMF) with a mode-conditioning patch cable.
- Interface Type: Duplex LC connector for standard fiber patching.
- Intelligent Monitoring: Supports DOM/DDM for real-time reporting of Tx/Rx power, temperature, and bias current.
- Plug-and-Play: Pre-programmed for Cisco SFP ports (compatible with GLC-LH-SMD); hot-swappable for easy field replacement.
- Low Power Consumption: Typical low power draw for the SFP class.
Technical Specifications (Concise)
| Item | Specification |
|---|---|
| Model Family / OEM Profile | Cisco GLC-LH-SMD compatible (factory-flashed) |
| Standard | 1000BASE-LX / LH (IEEE 802.3z) |
| Data Rate | 1.0 Gbps (up to 1.25 Gbps electrical) |
| Wavelength | 1310 nm (TX/RX) |
| Max. Link Distance | Up to 10 km on SMF; ~550 m on MMF (with mode-conditioning cable) |
| Connector | Duplex LC (UPC) |
| DOM / DDM | Supported (real-time optical diagnostics) |
| Operating Temperature | Commercial (typically 0 °C to 70 °C; check vendor page for extended variants) |
| Power Consumption | Low (typical SFP class; see vendor spec for exact mW) |
| Form Factor | SFP (hot-swappable) |
Note: Vendors may publish slightly different numbers (e.g., optical budget, exact temp ranges). For a precise datasheet, refer to the FS QA sheet or OEM documentation.
Typical Usage Scenarios
- Inter-Building Connectivity: Extend Gigabit Ethernet between buildings or floors using single-mode fiber runs up to 10 km.
- Cisco Equipment Upgrade: A cost-effective replacement for upgrading SFP ports in Cisco switches and routers.
- Network Backbone: Ideal for ISP access links, data center uplinks, and enterprise fiber backbones requiring 1 Gbps fiber.
- Legacy MMF Links: Utilize existing campus multimode fiber runs when paired with a mode-conditioning patch cable.
Quality Certifications





Reviews
There are no reviews yet.